Digiop BLK-IPS101 Guia de Configuração descarregar pdf (Página 42)

www.digiop.com

APPENDIX D: CONFIGURE THE DIGIOP® BLACK IP CAMERA ADDRESS

APPENDIX D

Congure the DIGIOP® Black IP Camera Address

D.1 Install IPAdmin Tool

The IPAdmin Tool, included on the CD mini disk, is a utility that will discover cameras installed on your network and enable you

to perform the initial network setup for each camera. After a camera is setup on the network, the Microsoft Internet Explorer

web browser can be used to see video from the camera, set the camera’s password, date and time, nalize camera hardware

adjustments, and congure the camera for functional requirements.

The IPAdminTool can be loaded on a Microsoft Windows XP, Vista or Windows 7 operating system (32- or 64-bit). To use this utility

for the initial setup of your camera, your computer must be connected to the same network subnet as your camera.

At a computer on the same LAN (subnet) where your cameras will be installed, do the following:

1. Insert the CD mini disk provided with your camera into your computer’s CD ROM drive and open the CD in a Windows

Explorer window.

2. Find the IPAdminTool directory on the CD.

3. Copy the IPAdminTool directory with its contents to your computer hard drive.

D.2 Congure the camera network settings

Devices attached to a Local Area Network (LAN) are each assigned a unique address (IP address) that they use when sending

messages with each other. No two devices on a single Ethernet network can have the same IP address. Otherwise, addressing

conicts will occur.

When your IP camera is attached to a network and initially powered on, it attempts acquire compatible network settings from

a DHCP server. If it cannot nd a DHCP server, it congures itself with the following static IP address, subnet mask, and gateway

setting, which may or may not be compatible with other devices on the network.

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Use the following procedure to setup and apply compatible, static, network settings for your camera. If connecting your camera to a

large enterprise network, consult with your network administrator for network settings before attaching the camera to the LAN to

ensure that your camera won’t conict with other devices. Your network administrator should also setup WAN (Internet) access to

the camera, if that is needed.

The example screens shown herein were taken from a BLK-IPS101 camera install. The screens you see may be slightly dierent.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47

Sem comentários

Digiop BLK-IPS101 Guia de Configuração Página 42