Digiop BLK-IPS101 Guia de Configuração descarregar pdf (Página 39)

35NVR and hDVR Systems Setup Guide

APPENDIX B: TROUBLESHOOTING DIGIOP® BLACK IP CAMERA

APPENDIX B

Troubleshooting DIGIOP® Black IP Cameras

B.1 IP Camera reset

NOTE

The BLK-IPD101 camera does not have a hardware Reset button.

To reset the camera while it is in use:

NOTE

The reboot process lasts about 2 minutes, during which time the camera will not respond to the IPAdmin Tool or transmit video to

a web browser

The camera can be rebooted in two ways:

• Using the IPAdmin Tool:

a. Start the IPAdmin Tool.

b. Find the entry for the camera you want to reboot and click it to select (highlight) it.

c. Click the Reboot button and enter the administrator ID and PW.

d. Click Refresh to re-discover the camera.

• Using the reset button on the camera:

a. Press and hold the reset button on the camera for 5 seconds.

b. Click Refresh to re-discover the camera.

B.2 Set camera to factory default network settings

The camera network settings can be forced to the factory default values:

Network settings acquired through DHCP on networks with DHCP

- OR -

Network settings forced to the following on networks were a DHCP server cannot be found:

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Sem comentários

Digiop BLK-IPS101 Guia de Configuração Página 39